From: abdul muhammed (abdulmuri@gmail.com)
Date: Tue Dec 18 2007 - 13:53:19 ART
Hi phil,
thank u for ur solution, the url u gave me work using the copy xmodem:
flash: filaname command.
On Dec 18, 2007 5:18 PM, Andrew Harris (andharri) <andharri@cisco.com>
wrote:
> Have you got the rommon prompt or Switch> prompt?
>
> If its rommon follow this
> http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note0
> 9186a008015bf9e.shtml
>
> If its Switch> then you need plug a TFTP server into a switch port,
> configure Vlan 1 with an IP address then type "copy tftp: flash:" and
> follow prompts!
>
> Andy
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> abdul muhammed
> Sent: 18 December 2007 14:30
> To: Cisco certification
> Subject: Need to Load a new IOS Image into my CAT 3560 Series switch
>
> Hi,
>
> I formated the flash memory of my CAT 3560 and lost my IOS Image on it.
> after reloading, it stop at promt switch:
> and when I check through the Dir flash:
> I found out that the Image file is missing.
> How do I load a new image file into the flash?.
>
>
> Thanks
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jan 01 2008 - 12:04:31 ARST