From: Dan C (cdan2154@gmail.com)
Date: Sat May 03 2008 - 07:47:00 ART
Hi,
It all depends on the hardware platform you are running , on 3560 you will
have more options :
Syd_Loc(config)#port-channel load-balance ?
dst-ip Dst IP Addr
dst-mac Dst Mac Addr
src-dst-ip Src XOR Dst IP Addr
src-dst-mac Src XOR Dst Mac Addr
src-ip Src IP Addr
src-mac Src Mac Addr
and on 3550 platform you will only have the following options:
BAC(config)#port-channel load-balance ?
dst-mac Dst Mac Addr
src-mac Src Mac Addr
Cheers,
Dan
On Sat, May 3, 2008 at 8:14 PM, ccie champ <ccie.champ@gmail.com> wrote:
> Hi all GS experts,
>
> 1. There is a server connected to SW1 and there is a vlan X on SW2 where
> multiple hosts exist
> 2. Both of them are connected using Layer 2 port-channel
>
> Incase, if users in VLAN X access server resources very frequently and we
> need to enable load balancing on port-channel
>
> I feel enabling *"dst mac"* based load balancing on *SW1* is just enough
>
> Any comments, am i right?
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2008 - 06:59:15 ART