From: darth router (darklordrouter@gmail.com)
Date: Mon Aug 18 2008 - 14:45:05 ART
Thanks bro,
Yea, something is screwy here. This doesn't work either. I can't ping
across. Here's the netfile GNS3 creates when I built what you showed me.
Look like it should?
autostart = False
[localhost:7200]
workingdir = C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp
[[7200]]
image = Z:\GNS3\images\c7200-adventerprisek9-mz.124-4.T3.bin
ghostios = True
[[ROUTER R6]]
console = 2002
slot4 = PA-A1
a4/0 = ATM 1
x = -254.0
y = -96.0
[[ATMSW ATM]]
1:102:0 = 2:201:0
2:201:0 = 1:102:0
x = -84.5
y = -161.5
[[ROUTER R8]]
console = 2003
slot4 = PA-A1
a4/0 = ATM 2
x = 89.0
y = -101.0
On Mon, Aug 18, 2008 at 5:38 AM, backbone systems <
backbone.systems@gmail.com> wrote:
> Check this out.. All for Dynamips
>
> R6:
>
> interface ATM4/0
> no ip address
> no atm ilmi-keepalive
> !
> interface ATM4/0.1 point-to-point
>
> ip address 12.12.12.1 255.255.255.0
> pvc 0/102
> !
>
> R8
> interface ATM4/0
> no ip address
> no atm ilmi-keepalive
> !
> interface ATM4/0.1 point-to-point
>
> ip address 12.12.12.2 255.255.255.0
> pvc 0/201
> !
>
>
> NET file
> [[Router R6]]
> model = 7200
> autostart = false
> slot4 = PA-A1
> A4/0 = ATMSW-1 1
>
>
> [[Router R8]]
> model = 7200
> autostart = false
> slot4 = PA-A1
> A4/0 = ATMSW-1 2
>
>
>
>
> [[ATMSW ATMSW-1]]
>
> 1:0:102 = 2:0:201
>
>
>
>
>
> BACK to BACk
>
> R1:
>
> !
> interface ATM4/0
> no ip address
> no atm enable-ilmi-trap
> no clns route-cache
> no shut
>
> !
> interface ATM4/0.1 point-to-point
> ip address 12.12.12.1 255.255.255.0
> no atm enable-ilmi-trap
> pvc 0/100
> !
> !
>
> R2:
>
> !
> interface ATM4/0
> no ip address
> no atm enable-ilmi-trap
> no clns route-cache
> no shut
> !
> interface ATM4/0.1 point-to-point
> ip address 12.12.12.2 255.255.255.0
> no atm enable-ilmi-trap
> pvc 0/100
> !
> !
>
> On Mon, Aug 18, 2008 at 2:05 PM, darth router <darklordrouter@gmail.com>
> wrote:
> > Sup yalls,
> >
> > I can't even get the most basic of ATM scenarios working for some reason.
> > I'm not sure if it's dynamips (latest GS3), or me being a complete
> bonehead
> > with ATM. Can someone whip up a two router ATM config (net file and
> configs)
> > in GNS3 (working please) and post it here, so I can test with it? I don't
> > care if it's multipoint, point to point, on the main interface, etc..
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:31 ART