From: CCIE Hunter (cisco.ccie.guru@gmail.com)
Date: Thu Aug 21 2008 - 01:05:18 ART
Hi dears...
MPLS TE can't up on tunnel 1. error Destination IP address, 2.2.2.2, not
found.
Current configuration : 175 bytes
!
interface Tunnel1
ip unnumbered Loopback0
tunnel destination 2.2.2.2
tunnel mode mpls traffic-eng
tunnel mpls traffic-eng path-option 1 dynamic
no routing dynamic
end
--------------------------------------
Name: R2_t1 (Tunnel1) Destination: 2.2.2.2
Status:
Admin: up Oper: down Path: not valid Signalling: Down
path option 1, type dynamic
Config Parameters:
Bandwidth: 0 kbps (Global) Priority: 7 7 Affinity: 0x0/0xFFFF
Metric Type: TE (default)
AutoRoute: disabled LockDown: disabled Loadshare: 0 bw-based
auto-bw: disabled
History:
Tunnel:
Time since created: 38 minutes, 35 seconds
Path Option 1:
Last Error: PCALC:: Destination IP address, 2.2.2.2, not found
----------------------
1.0.0.0/32 is subnetted, 1 subnets
O 1.1.1.1 [110/65] via 192.168.1.1, 00:57:38, Serial0/0
2.0.0.0/32 is subnetted, 1 subnets
O 2.2.2.2 [110/129] via 192.168.1.1, 00:57:38, Serial0/0
3.0.0.0/32 is subnetted, 1 subnets
C 3.3.3.3 is directly connected, Loopback0
10.0.0.0/30 is subnetted, 1 subnets
O 10.1.1.0 [110/128] via 192.168.1.1, 00:57:38, Serial0/0
192.168.1.0/30 is subnetted, 1 subnets
C 192.168.1.0 is directly connected, Serial0/0
Please help..
Thanks
1.0.0.0/32 is subnetted, 1 subnets
O 1.1.1.1 [110/65] via 192.168.1.1, 00:57:38, Serial0/0
2.0.0.0/32 is subnetted, 1 subnets
O 2.2.2.2 [110/129] via 192.168.1.1, 00:57:38, Serial0/0
3.0.0.0/32 is subnetted, 1 subnets
C 3.3.3.3 is directly connected, Loopback0
10.0.0.0/30 is subnetted, 1 subnets
O 10.1.1.0 [110/128] via 192.168.1.1, 00:57:38, Serial0/0
192.168.1.0/30 is subnetted, 1 subnets
C 192.168.1.0 is directly connected, Serial0/0
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:31 ART