RE: MPLS TE can't up

From: Scott Morris (swm@emanon.com)
Date: Thu Aug 21 2008 - 02:00:02 ART

• Next message: Joseph Brunner: "RE: How Cisco makes CCIE lab exam questions - here is the"
• Previous message: CCIE Hunter: "MPLS TE can't up"
• Maybe in reply to: CCIE Hunter: "MPLS TE can't up"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Have you enabled traffic engineering in your OSPF area?

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of CCIE
Hunter
Sent: Thursday, August 21, 2008 12:05 AM
To: ccie forum
Subject: MPLS TE can't up

Hi dears...
MPLS TE can't up on tunnel 1. error Destination IP address, 2.2.2.2, not
found.

Current configuration : 175 bytes
!
interface Tunnel1
 ip unnumbered Loopback0
 tunnel destination 2.2.2.2
 tunnel mode mpls traffic-eng
 tunnel mpls traffic-eng path-option 1 dynamic no routing dynamic end

--------------------------------------

Name: R2_t1 (Tunnel1) Destination: 2.2.2.2
  Status:
    Admin: up Oper: down Path: not valid Signalling: Down
    path option 1, type dynamic
  Config Parameters:
    Bandwidth: 0 kbps (Global) Priority: 7 7 Affinity: 0x0/0xFFFF
    Metric Type: TE (default)
    AutoRoute: disabled LockDown: disabled Loadshare: 0 bw-based
    auto-bw: disabled
  History:
    Tunnel:
      Time since created: 38 minutes, 35 seconds
    Path Option 1:
      Last Error: PCALC:: Destination IP address, 2.2.2.2, not found
----------------------

     1.0.0.0/32 is subnetted, 1 subnets
O 1.1.1.1 [110/65] via 192.168.1.1, 00:57:38, Serial0/0
     2.0.0.0/32 is subnetted, 1 subnets
O 2.2.2.2 [110/129] via 192.168.1.1, 00:57:38, Serial0/0
     3.0.0.0/32 is subnetted, 1 subnets
C 3.3.3.3 is directly connected, Loopback0
     10.0.0.0/30 is subnetted, 1 subnets
O 10.1.1.0 [110/128] via 192.168.1.1, 00:57:38, Serial0/0
     192.168.1.0/30 is subnetted, 1 subnets
C 192.168.1.0 is directly connected, Serial0/0

Please help..

Thanks

     1.0.0.0/32 is subnetted, 1 subnets
O 1.1.1.1 [110/65] via 192.168.1.1, 00:57:38, Serial0/0
     2.0.0.0/32 is subnetted, 1 subnets
O 2.2.2.2 [110/129] via 192.168.1.1, 00:57:38, Serial0/0
     3.0.0.0/32 is subnetted, 1 subnets
C 3.3.3.3 is directly connected, Loopback0
     10.0.0.0/30 is subnetted, 1 subnets
O 10.1.1.0 [110/128] via 192.168.1.1, 00:57:38, Serial0/0
     192.168.1.0/30 is subnetted, 1 subnets
C 192.168.1.0 is directly connected, Serial0/0

Blogs and organic groups at http://www.ccie.net

• Next message: Joseph Brunner: "RE: How Cisco makes CCIE lab exam questions - here is the"
• Previous message: CCIE Hunter: "MPLS TE can't up"
• Maybe in reply to: CCIE Hunter: "MPLS TE can't up"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:31 ART