From: CCIE To Be (ccie.tobe81@gmail.com)
Date: Tue Jan 13 2009 - 15:35:51 ARST
Hi,
How can we get idea that allocation of bandwidth is actually requiring
configuration of 'Policing'. If we interpret word 'bandwidth allocation' as
bandwidth guarantee than we can use CBWFQ to guarantee bandwidth ?
HTH
On Tue, Jan 13, 2009 at 8:26 PM, Expert Aspirant <frenzeus@streamyx.com>wrote:
> assuming you're talking about an IOS router, have u tried matching the
> traffic with an ACL tied to a class-map, using a policy-map referencing the
> class-map and do inbound policing?
> i.e. (off the top of my head)
> access-list 1 permit 10.0.0.0 0.255.255.255
> !
> class-map match-all Net-10.0.0.0
> match access-group 1
> !
> policy-map GUARANTEE
> class Net-10.0.0.0
> police cir 512000 conform transmit exceed drop
> !
> interface Ethernet0/0
> service-policy in GUARANTEE
>
> HTH.
> -K
>
> ----- Original Message ----- From: "Dimitry" <dimokl@gmail.com>
> To: <ccielab@groupstudy.com>
> Sent: Tuesday, January 13, 2009 2:58 PM
> Subject: bandwidth allocation
>
>
>
> Hi, group
>>
>> I haven't see much logic in following request , but will really appreciate
>> your answers.
>> The question is "how can we allocate specific amount of interface
>> bandwidth
>> for traffic from specific network in input direction ?"
>>
>> Thanks in advance
>> Dimitry.
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sun Mar 01 2009 - 09:43:37 ARST