Re: ASYNC line connectivity issue to console

Hi Andy,

In my case 1 or 2 console login I'm getting but not the rest. They hangup as
shown in my mail

Regards
J.Daniels

On 7/25/09, Andy Reid <ccie_at_reid.it> wrote:
>
> I have compared your configuration to mine and I cannot see anything out of
> the ordinary with it.
>
> Have you tried the clear line command? It appears you are getting to the
> terminal server but not out of the line (though usually if it were busy, it
> would have an asterisk next to the line number).
>
> Note that with my setup I had to add "stopbits 1" to the line 0/0/1 0/0/15
> section before it would work.
>
> regards Andy
>
> jack daniels wrote:
>
>> Dear Group,
>>
>> I'm facing a issue -
>>
>> My connectivity -
>>
>>
>> 2811 ROUTER -CAB-HD8-KIT ( ASYNC port 8-15) --- ROUTERS CONSOLE PORT
>>
>>
>> PROBLEM - when I do telnet to TEST1 , it opens but when I try to some
>> other
>> it hangs on below mentioned screen - nothing comes after this.
>> Please advise why so . Below is the configuration of my terminal server.
>>
>>
>>
>>
>>
>> ROUTER#telnet TEST4
>> Trying TEST4 (1.1.1.1, 2011)... Open
>> CCCCCC
>>
>> *************************************************************************
>> * L E G A L N O T I C E -- Y O U M U S T R E A D *
>> *************************************************************************
>> * *
>> * You must have explicit permission to access this device. *
>> * All activities performed on this device are logged and *
>> * violations of this policy may result in disciplinary/legal action. *
>> * *
>> *************************************************************************
>>
>>
>>
>>
>>
>> CONFIGURATION--------
>>
>> no ip domain lookup
>> ip host TEST1 2014 1.1.1.1
>> ip host TEST2 2016 1.1.1.1
>> ip host TEST3 2015 1.1.1.1
>> ip host TEST4 2011 1.1.1.1
>> ip host TEST5 2012 1.1.1.1
>> !
>> !
>> !
>> interface Loopback0
>> description ***LOOPBACK FOR TERMINAL CONSOLE CONNECTIVITY***
>> ip address 1.1.1.1 255.255.255.255
>> !
>> interface FastEthernet0/1
>> description ***CONNECTED TO Switch***
>> ip address 2.2.2.2 255.255.255.240
>> duplex full
>> speed auto
>> !
>> interface Async0/0/0
>> no ip address
>> encapsulation slip
>> !
>> interface Async0/0/1
>> no ip address
>> encapsulation slip
>> !
>> interface Async0/0/2
>> encapsulation slip
>> !
>> interface Async0/0/3
>> no ip address
>> encapsulation slip
>> !
>> interface Async0/0/4
>> no ip address
>> encapsulationslip
>> !
>> interface Async0/0/5
>> no ip address
>> encapsulation slip
>> !
>> interface Async0/0/6
>> no ip address
>> encapsulation slip
>> !
>> interface Async0/0/7
>> no ip address
>> encapsulation slip
>> !
>> interface Async0/0/8
>> no ip address
>> encapsulation slip
>> !
>> interface Async0/0/9
>> no ip address
>> encapsulation slip
>> !
>> interface Async0/0/10
>> no ip address
>> encapsulation slip
>> !
>> interface Async0/0/11
>> no ip address
>> encapsulation slip
>> !
>> interface Async0/0/12
>> no ip address
>> encapsulation slip
>> !
>> interface Async0/0/13
>> no ip address
>> encapsulation slip
>> !
>> interface Async0/0/14
>> no ip address
>> encapsulation slip
>> !
>> interface Async0/0/15
>> no ip address
>> encapsulation slip
>> !
>> !
>> no ip http server
>> !
>> !
>> control-plane
>> !
>>
>> *************************************************************************
>> * L E G A L N O T I C E -- Y O U M U S T R E A D *
>> *************************************************************************
>> * *
>> * You must have explicit permission to access this device. *
>> * All activities performed on this device are logged and *
>> * violations of this policy may result in disciplinary/legal action. *
>> * *
>> ^C
>> !
>> line con 0
>> password XXXX
>> login
>> line aux 0
>> line 0/0/0
>> session-timeout 20
>> exec-timeout 0 0
>> no exec
>> transport preferred telnet
>> transport input all
>> transport output telnet
>> line 0/0/1 0/0/15
>> session-timeout 200
>> exec-timeout 0 0
>> no exec
>> transport input all
>> transport output all
>>
>> ROUTER#sh users
>> Line User Host(s) Idle Location
>> * 0 con 0 idle 00:00:00
>> vty 322 idle 00:00:45 61.95.250.177
>>
>> Interface User Mode Idle Peer Address
>>
>> ROUTER#sh line
>> Tty Line Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns
>> Int
>> * 0 0 CTY - - - - - 0 0
>> 0/0 -
>> 1 1 AUX 9600/9600 - - - - - 0 0
>> 0/0 -
>> 0/0/0 2 TTY 9600/9600 - - - - - 8 8
>> 56245/0 -
>> 0/0/1 3 TTY 9600/9600 - - - - - 2 134
>> 0/0 -
>> 0/0/2 4 TTY 9600/9600 - - - - - 1 0
>> 0/0 -
>> 0/0/3 5 TTY 9600/9600 - - - - - 0 130
>> 0/0 -
>> 0/0/4 6 TTY 9600/9600 - - - - - 0 49
>> 0/0 -
>> 0/0/5 7 TTY 9600/9600 - - - - - 3 50
>> 0/0 -
>> 0/0/6 8 TTY 9600/9600 - - - - - 1 33
>> 0/0 -
>> 0/0/7 9 TTY 9600/9600 - - - - - 0 0
>> 0/0 -
>> 0/0/8 10 TTY 9600/9600 - - - - - 0 0
>> 0/0 -
>> 0/0/9 11 TTY 9600/9600 - - - - - 0 79
>> 0/0 -
>> 0/0/1 12 TTY 9600/9600 - - - - - 0 17
>> 0/0 -
>> 0/0/1 13 TTY 9600/9600 - - - - - 1 22
>> 0/0 -
>> 0/0/1 14 TTY 9600/9600 - - - - - 1 0
>> 0/0 -
>> 0/0/1 15 TTY 9600/9600 - - - - - 0 0
>> 0/0 -
>> 0/0/1 16 TTY 9600/9600 - - - - - 0 0
>> 0/0 -
>> 0/0/1 17 TTY 9600/9600 - - - - - 0 0
>> 0/0 -
>> * 322 322 VTY - - - - - 291 0
>> 0/0 -
>> 323 323 VTY - - - - - 13 0
>> 0/0 -
>> 324 324 VTY - - - - - 1 0
>> 0/0 -
>> 325 325 VTY - - - - - 0 0
>> 0/0 -
>> --More-- Tty Line Typ Tx/Rx A Modem
>> Roty AccO AccI Uses Noise Overruns Int
>>
>> 326 326 VTY - - - - - 0 0
>> 0/0 -
>> 327 327 VTY - - - - - 0 0
>> 0/0 -
>> 328 328 VTY - - - - - 0 0
>> 0/0 -
>> 329 329 VTY - - - - - 0 0
>> 0/0 -
>> 330 330 VTY - - - - - 0 0
>> 0/0 -
>> 331 331 VTY - - - - - 0 0
>> 0/0 -
>> 332 332 VTY - - - - - 0 0
>> 0/0 -
>> 333 333 VTY - - - - - 0 0
>> 0/0 -
>> 334 334 VTY - - - - - 0 0
>> 0/0 -
>> 335 335 VTY - - - - - 0 0
>> 0/0 -
>> 336 336 VTY - - - - - 0 0
>> 0/0 -
>> 337 337 VTY - - - - - 0 0
>> 0/0 -
>>
>> Line(s) not in async mode -or- with no hardware support:
>> 18-321
>>
>> ROUTER#sh line
>> Tty Line Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns
>> Int
>> * 0 0 CTY - - - - - 0 0
>> 0/0 -
>> 1 1 AUX 9600/9600 - - - - - 0 0
>> 0/0 -
>> 0/0/0 2 TTY 9600/9600 - - - - - 8 8
>> 56245/0 -
>> 0/0/1 3 TTY 9600/9600 - - - - - 2 134
>> 0/0 -
>> 0/0/2 4 TTY 9600/9600 - - - - - 1 0
>> 0/0 -
>> 0/0/3 5 TTY 9600/9600 - - - - - 0 130
>> 0/0 -
>> 0/0/4 6 TTY 9600/9600 - - - - - 0 49
>> 0/0 -
>> 0/0/5 7 TTY 9600/9600 - - - - - 3 50
>> 0/0 -
>> 0/0/6 8 TTY 9600/9600 - - - - - 1 33
>> 0/0 -
>> 0/0/7 9 TTY 9600/9600 - - - - - 0 0
>> 0/0 -
>> 0/0/8 10 TTY 9600/9600 - - - - - 0 0
>> 0/0 -
>> 0/0/9 11 TTY 9600/9600 - - - - - 0 79
>> 0/0 -
>> 0/0/1 12 TTY 9600/9600 - - - - - 0 17
>> 0/0 -
>> 0/0/1 13 TTY 9600/9600 - - - - - 1 22
>> 0/0 -
>> 0/0/1 14 TTY 9600/9600 - - - - - 1 0
>> 0/0 -
>> 0/0/1 15 TTY 9600/9600 - - - - - 0 0
>> 0/0 -
>> 0/0/1 16 TTY 9600/9600 - - - - - 0 0
>> 0/0 -
>> 0/0/1 17 TTY 9600/9600 - - - - - 0 0
>> 0/0 -
>> * 322 322 VTY - - - - - 291 0
>> 0/0 -
>> 323 323 VTY - - - - - 13 0
>> 0/0 -
>> 324 324 VTY - - - - - 1 0
>> 0/0 -
>> 325 325 VTY - - - - - 0 0
>> 0/0 -
>> --More-- Tty Line Typ Tx/Rx A Modem
>> Roty AccO AccI Uses Noise Overruns Int
>>
>> 326 326 VTY - - - - - 0 0
>> 0/0 -
>> 327 327 VTY - - - - - 0 0
>> 0/0 -
>> 328 328 VTY - - - - - 0 0
>> 0/0 -
>> 329 329 VTY - - - - - 0 0
>> 0/0 -
>> 330 330 VTY - - - - - 0 0
>> 0/0 -
>> 331 331 VTY - - - - - 0 0
>> 0/0 -
>> 332 332 VTY - - - - - 0 0
>> 0/0 -
>> 333 333 VTY - - - - - 0 0
>> 0/0 -
>> 334 334 VTY - - - - - 0 0
>> 0/0 -
>> 335 335 VTY - - - - - 0 0
>> 0/0 -
>> 336 336 VTY - - - - - 0 0
>> 0/0 -
>> 337 337 VTY - - - - - 0 0
>> 0/0 -
>> Line(s) not in async mode -or-
>> with no hardware support:
>> 18-321
>>
>> Regards
>> J.Daniels
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sat Jul 25 2009 - 22:11:37 ART