Cisco 360 Lab 33 - IRDP config on the Sw

Can anyone confirm the requirement of also configuring "ip irdp" on Sw4 int
fa 0/4 before actually getting the gateway addresses from R3 and R6? I did
plenty of debuging on R6 and R3 to see the 224.0.0.1 IRDP message sent, but
wasn't seeing anything on SW4 fa0/4 routed port. I decided to confiugre it
on the interface to see if that was the issue. And it was. But according to
the AK and the Master Config - that configuration is not on the switch.

and the doc cd for IRDP is dismal. There's no configuration for the host
side.

thanks in advance,
r/
LG

Blogs and organic groups at http://www.ccie.net
Received on Mon May 03 2010 - 20:03:14 ART