Re: Help Voice Experts!! QSIG Decode command

Hi Emir,
Please post your config. and provide more detail about your setup.

make sure you've below command:
on cisco gw:

Serial0/0/1 (or whatever)

isdn supp-service name calling

--frog

On Mon, Jun 28, 2010 at 8:25 AM, emir d souza <emir979_at_gmail.com> wrote:

> Hi,
>
> I'm trying to find out if this command is IOS or platform dependant. I'm
> running IOS 12.4 (c7200-jk9s-mz.124-25b) and I can't see this command on my
> router, and yet it's in the Cisco documentation !!
>
> Unless there is another way of doing this, I'm running a Cisco GW in
> between
> an Ericsson PBX and a Avaya Communications Manager, the problem now is
> parsing the Caller ID between the two phone systems.
>
>
> R1(conf-serv-h323)#?
> VOICE SERVICE VOIP H323 configuration commands:
> bearercap-ie Specify bearercap_ie coding
> billing B-channel info present
> call Global setting for H.323 Calls
> default Set a command to its defaults
> emptycapability Empty Capability (TCS=0)
> encoding Global setting for H.323 ASN.1 encoding options
> exit Exit from voice service voip h323 configuration mode
> h225 TCP H225 call signalling channel
> h245 H245 Signalling
> h450 H450 parameter configuration
> no Negate a command or set its defaults
> ras Gateway RAS configuration
> session H323 Voice Protocol session config
> telephony-service For CCME H323 connections
>
>
> Appreciate your help guys!!
>
> Mish
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Jun 28 2010 - 22:28:25 ART