VLAN-based EoMPLS

From: Manaf Al Oqlah <manafo_at_hotmail.com>
Date: Wed, 27 Oct 2010 14:30:29 +0300

Hi,

I have established an EoMPLS circuit on ME3750 switches as below. everything
seems to be working fine as my virtual circuit is UP
but my problem is that I cant ping IP address CE02 from CE01

PC01---CE01---PE01---PE02---CE02---PC02

I have applied the following configuration on PE01 & PE02 ES ports

interface loopback 0
ip address 1.1.1.1 255.255.255.255
!
interface GigabitEthernet1/1/1
description to PE02
 ip address 10.0.0.1 255.255.255.252
 mpls ip
!
interface GigabitEthernet1/1/2
description to CE01
switchport mode access
switchport access vlan 100
!
vlan 100
!
interface vlan 100
xconnect 2.2.2.2 100 encapsulation mpls

where could me my problem!

Regards,
Manaf Al Oqlah

Blogs and organic groups at http://www.ccie.net
Received on Wed Oct 27 2010 - 14:30:29 ART

This archive was generated by hypermail 2.2.0 : Mon Nov 01 2010 - 06:42:06 ART