Re: 2511 ACCESS SERVER

ACHAL,
your config is ok as long as your lines are numbered 1 to 16,
which in the case of a 2511 they should. Do a show line to verify.

What exactly is your problem ? Can you telnet to the reverse telnet port
and get connected ? Or refused ?
Connected and nothing ?

-Carlos

ACHAL GUPTA @ 15/06/2011 20:08 -0300 dixit:
> Hello Experts,
>
> Can anyone tell me how can i make my 2511 roter as a access server?
>
> i tried with following config but not working.
>
> I gave the ip address to ethernet (172.16.1.2) and its pinging my Laptop ip
> address.
>
> i attach my octal cable also with no.1 cable in R1 and no.2 cable in
> R2.........
>
> ip host R1 2001 172.16.1.2
> ip host R2 2002 172.16.1.2
> - - - - - -
> - - - - - -
>
> line con 0
> line 1 16
> exec-timeout 0 0
> no exec
> transport input all
> line vty 0 4
> password cisco
> login
>
>
> i did that config but it is not working
>
> pls tell me ehat i m doing wrong and what else i will have to do?
>

-- 
Carlos G Mendioroz  <tron_at_huapi.ba.ar>  LW7 EQI  Argentina
Blogs and organic groups at http://www.ccie.net