Re: Extended IP access list

Hi all
I need your help something changed a while ago in the permission access for this mail group ccie group study that I can not send any new topic email to the study group
Could u guys please help
Thanks

Sent from my iPhone

On 2011-07-11, at 10:55 PM, <jhnrose401_at_gmail.com> wrote:

> Dear
>
> I am working on the extended access list
>
> TASK when R1 try to ping the 3.3.3.3 using source 2.2.2.2 ping the 3.3.3.3 it
> will not reachable. i am not able to do this pls help
>
> when i will use host key word i want to do this is using host key word
>
> R1 :
> sh run | sec router
> router rip
> version 2
> network 0.0.0.0
> no auto-summary
> Serial1/0 10.1.1.1 YES manual up up
>
> Loopback1 2.2.2.2 YES manual up up
>
>
> R2
>
> Serial1/0 10.1.1.2 YES SLARP up up
>
> Loopback2 3.3.3.3 YES manual up up
>
> Loopback3 4.4.4.4 YES manual up up
>
>
> router rip
> version 2
> network 0.0.0.0
> distribute-list 101 in
> no auto-summary
>
> Router#sh access-lists
> Extended IP access list 101
> 10 deny ip host 2.2.2.2 host 3.3.3.0
> 20 permit ip any any (1 match)
> Router#ping 3.3.3.3 source 2.2.2.2
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 3.3.3.3, timeout is 2 seconds:
> Packet sent with a source address of 2.2.2.2
> !!!!!
> Success rate is 100 percent (5/5), round-trip min/avg/max = 60/83/136 ms
>
>
> the
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Jul 12 2011 - 00:13:28 ART