Extended IP access list

Dear

I am working on the extended access list

TASK when R1 try to ping the 3.3.3.3 using source 2.2.2.2 ping the 3.3.3.3 it
will not reachable. i am not able to do this pls help

when i will use host key word i want to do this is using host key word

R1 :
sh run | sec router
router rip
 version 2
 network 0.0.0.0
 no auto-summary
Serial1/0 10.1.1.1 YES manual up up

Loopback1 2.2.2.2 YES manual up up

R2

Serial1/0 10.1.1.2 YES SLARP up up

Loopback2 3.3.3.3 YES manual up up

Loopback3 4.4.4.4 YES manual up up

router rip
 version 2
 network 0.0.0.0
 distribute-list 101 in
 no auto-summary

Router#sh access-lists
Extended IP access list 101
    10 deny ip host 2.2.2.2 host 3.3.3.0
    20 permit ip any any (1 match)
Router#ping 3.3.3.3 source 2.2.2.2

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 3.3.3.3, timeout is 2 seconds:
Packet sent with a source address of 2.2.2.2
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 60/83/136 ms

the

Blogs and organic groups at http://www.ccie.net
Received on Mon Jul 11 2011 - 22:55:58 ART