Using EIGRP Variance

Dear Forum,

I am facing the issue with EIGRP Un-Equal cost load balancing. Even by using
variance the link with low cost is not installed inside routing table.

Below is the EIGRP topology table and the configuration.

================================

R6#show ip eigrp topology 10.10.24.0 255.255.255.0

IP-EIGRP (AS 100): Topology entry for 10.10.24.0/24

  State is Passive, Query origin flag is 1, 1 Successor(s), FD is 624896

  Routing Descriptor Blocks:

  10.10.1.5 (FastEthernet0/0), from 10.10.1.5, Send flag is 0x0

      Composite metric is (624896/624896), Route is Internal

      Vector metric:

        Minimum bandwidth is 4096 Kbit

        Total delay is 3000 microseconds

        Reliability is 255/255

        Load is 1/255

        Minimum MTU is 1476

        Hop count is 2

  10.10.1.3 (FastEthernet0/0), from 10.10.1.3, Send flag is 0x0

      Composite metric is (833280/833280), Route is Internal

      Vector metric:

        Minimum bandwidth is 3072 Kbit

        Total delay is 3000 microseconds

        Reliability is 255/255

        Load is 1/255

        Minimum MTU is 1500

        Hop count is 2

==========================================

R6#sh run | s eigrp

router eigrp 100

variance 2

network 10.10.1.1 0.0.0.0

metric weights 0 1 0 0 0 0

no auto-summary

neighbor 10.10.1.5 FastEthernet0/0

neighbor 10.10.1.3 FastEthernet0/0

=========================================

Regards,

Shahid

Blogs and organic groups at http://www.ccie.net
Received on Sun May 13 2012 - 18:24:26 ART