thanks  for reply but why  my boot command is not working  and  it is
always booting with first image ..
On Mon, Nov 4, 2013 at 2:10 PM, Antonio Soares <amsoares_at_netcabo.pt> wrote:
> Use the verify /md5 to be completely sure.
>
> By default the 4500's have confreg=2101, you need to change it to 2102.
>
>
>
> Regards,
>
> Antonio Soares, CCIE #18473 (R&S/SP)
> amsoares_at_netcabo.pt
> http://www.ccie18473.net
>
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> Imran Ali
> Sent: segunda-feira, 4 de Novembro de 2013 06:32
> To: Cisco certification
> Subject: OT: Image verification
>
> Hi  all
>
> i have  uploaded an image and   i have done verification  .
>
> core1#verify cat4500-entservicesk9-mz.122-54.SG1.bin
>
> CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
> C
>
> CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
> C
>
> CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
> C
>
> CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
> C
>
> CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
> C
>
> CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
> C
>
> CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
> C
> CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
> Verified cat4500-entservicesk9-mz.122-54.SG1.bin
> SV-TS202-BB1#
>
>
> 1)   what  does this  verification mean ?  does it  mean  that  checksum is
> ok ?
>
> or   is  it  safe  now  to  delete old image  and  reload  so  that it
> boots  with this image.
>
> this  is  cat4506..
>
>
>
> 2) i  have  tried  to set boot preference to new image ..but  still it  is
> booting with old image ..
> core1#show run | in boot
> boot system flash bootflash:cat4500-entservicesk9-mz.122-54.SG1.bin
>
> the issue is  boot command  is excepting any thing i type and not verifying
> its syntax..
>
> core1(config)#boot system flash abc
> core1(config)#
>
>
> what is the correct syntax .
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
Received on Mon Nov 04 2013 - 16:55:54 ART
This archive was generated by hypermail 2.2.0 : Wed Jan 01 2014 - 20:26:19 ART