Re: Cat3560 Eigrp Authentication

Have you set up your key-chain thats referenced under the SVI?

!
Conf t
Key-chain LAB
  Key 1
   Key string CISCO
   accept-lifetime ......
   send-lifetime ......
!

\Sam.

Sent from mobile excuse brevity.
On 1 Dec 2013 03:38, "Daniel Barney" <daniel.barney.b_at_hotmail.com> wrote:

> Hello everyone
> I am having trouble setting up EIGRP authentication, on a SVI ... Any
> recommendations?
>
> SW1(config)#int vlan 1026
> SW1(config-if)#ip authentication key-chain eigrp 200 LAB
> SW1(config-if)#ip authentication mode eigrp 200 md5
> SW1(config-if)#do sh run int vlan 1026
> Building configuration...
>
> Current configuration : 104 bytes
> !
> interface Vlan1026
> ip address 131.10.100.10 255.255.255.0
> ip authentication mode eigrp 200 md5 ----/ Key-chain command is not set!
> end
>
> SW1(config)#do sh ip eigrp 200 int det
> EIGRP-IPv4:(200) interfaces for process 200
>
> Xmit Queue Mean Pacing Time Multicast
> Pending
> Interface Peers Un/Reliable SRTT Un/Reliable Flow Timer
> Routes
> Vl1026 1 0/0 6 0/1 50
> 0
> Hello interval is 5 sec
> Next xmit serial <none>
> Un/reliable mcasts: 0/2 Un/reliable ucasts: 3/9
> Mcast exceptions: 2 CR packets: 1 ACKs suppressed: 2
> Retransmissions sent: 2 Out-of-sequence rcvd: 0
> Topology-ids on interface - 0
> Authentication mode is not set
>
> SW1(config-if)#do sh key chain
> Key-chain LAB:
> key 1 -- text "eigrp200"
> accept lifetime (always valid) - (always valid) [valid now]
> send lifetime (always valid) - (always valid) [valid now]
>
> Thank you all
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Dec 01 2013 - 13:59:57 ART