From: Fred Ingham (fningham@xxxxxxxxxxxxxxxx)
Date: Sun Nov 05 2000 - 16:45:46 GMT-3
You must use translational bridging between Ethernet and Token
Ring interfaces on the same router. DLSW will handle the translation
between R1 e0 and R2 Ethernet or Token Ring.
Fred
Philip Lai wrote:
>
> Hi, all
> e0|---R1--s0--s0-R2---|e0
> |
> to0
> I am reading the Neworkers presentation powerpoint and it has a scenario
> like this.
> If I am going to bridge the interface R1e0, R2 e0 and to0 by using DLSW, is
> it necessary to do a translational bridging in R2 ? The example do so. But I
> am wondering if I have form a dlsw peer between R1 and R2, I can bridge R1
> e0 to R2 to0 and R1 e0 to R2 e0. then R2 to0 and e0 should be able to bridge
> each other. Am I right ?
>
> Thanks for any suggestion.
> Philip
> Only one week to the exam but they did change the scope !!!! Shit !!! What
> should I do now ?
>
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 08:25:41 GMT-3