Re: OSPF : Type-7 to Type-5 block !!

From: Jayashanker Warrier (jwarrier@rediffmail.com)
Date: Mon Sep 16 2002 - 10:32:40 GMT-3

• Next message: DAN DORTON: "RE: Pix with Two ISP"
• Previous message: Olive, Darren: "RE: Interfaces not specifically defined ..."
• Maybe in reply to: Ajit: "OSPF : Type-7 to Type-5 block !!"
• Next in thread: Volkov, Dmitry (Toronto - BCE): "RE: OSPF : Type-7 to Type-5 block !!"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Ajit,

I hope summary-address will do for you. This to be configured in
the NSSA ABR. The P bit is always set (set to 1)(the routes will
be translated) and there is no option to set to 0 at the ASBR
(NSSA) so that only some routes are leaked into OSPF by ABR

Thaks

Jayashanker

t 18:18 16/09/2002 +0530, Ajit wrote:
How does one set the P bit to 0,(in the hello pkts) in an NSSA
area, such that
the redistributed routes into the NSSA area (Type-7 ) stay only
within that
area and do not get converted to Type-5 when it hits the ABR of
that NSSA
area.

What needs to be set on the NSSA ASBR router thats doing the
residtribution
!!

Thanks....

• Next message: DAN DORTON: "RE: Pix with Two ISP"
• Previous message: Olive, Darren: "RE: Interfaces not specifically defined ..."
• Maybe in reply to: Ajit: "OSPF : Type-7 to Type-5 block !!"
• Next in thread: Volkov, Dmitry (Toronto - BCE): "RE: OSPF : Type-7 to Type-5 block !!"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:53 GMT-3