RE: Extended IP access list

Dear
the distribution list is use to filter the routing update in this case apply
your access list the interface not to the routing process.
int s1/0access-group XX in
 aslo it not correct 10 deny ip host 2.2.2.2 host 3.3.3.0correct one is 10
deny ip host 2.2.2.2 host 3.3.3.3

> Date: Mon, 11 Jul 2011 22:55:58 -0400
> To: ccielab_at_groupstudy.com
> From: jhnrose401_at_gmail.com
> Subject: Extended IP access list
>
> Dear
>
> I am working on the extended access list
>
> TASK when R1 try to ping the 3.3.3.3 using source 2.2.2.2 ping the 3.3.3.3
it
> will not reachable. i am not able to do this pls help
>
> when i will use host key word i want to do this is using host key word
>
> R1 :
> sh run | sec router
> router rip
> version 2
> network 0.0.0.0
> no auto-summary
> Serial1/0 10.1.1.1 YES manual up up
>
> Loopback1 2.2.2.2 YES manual up up
>
>
> R2
>
> Serial1/0 10.1.1.2 YES SLARP up up
>
> Loopback2 3.3.3.3 YES manual up up
>
> Loopback3 4.4.4.4 YES manual up up
>
>
> router rip
> version 2
> network 0.0.0.0
> distribute-list 101 in
> no auto-summary
>
> Router#sh access-lists
> Extended IP access list 101
> 10 deny ip host 2.2.2.2 host 3.3.3.0
> 20 permit ip any any (1 match)
> Router#ping 3.3.3.3 source 2.2.2.2
>
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 3.3.3.3, timeout is 2 seconds:
> Packet sent with a source address of 2.2.2.2
> !!!!!
> Success rate is 100 percent (5/5), round-trip min/avg/max = 60/83/136 ms
>
>
> the
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Jul 12 2011 - 09:27:02 ART